Package Base Details: linux-lqx

Git Clone URL: (read-only, click to copy)
Submitter: akurei
Maintainer: sir_lucjan (damentz)
Last Packager: damentz
Votes: 126
Popularity: 2.42
First Submitted: 2011-08-08 16:08
Last Updated: 2020-01-23 00:53

Latest Comments

« First ‹ Previous ... 4 5 6 7 8 9 10 11 12 13 14 ... Next › Last »

Agafron commented on 2018-11-19 19:06

@damentz, I have some diff of versions:

1 aur/linux-lqx 4.18.19_2-2 [installed: 4.18.20_1-1] (114) (1,86)

A desktop oriented kernel and modules with Liquorix patches

2 aur/linux-lqx-docs 4.18.19_2-2 [installed: 4.18.20_1-1] (114) (1,86)

Kernel hackers manual - HTML documentation that comes with the linux-lqx.

3 aur/linux-lqx-headers 4.18.19_2-2 [installed: 4.18.20_1-1] (114) (1,86)

Its PKGBUILD mistake?

damentz commented on 2018-11-18 18:39

@Terence, that's good information. While you were comparing results, I was measuring the overhead of 1000hz vs 250hz.

With 250hz, the timer consumes about 2-3ms, every second. Increasing this to 1000hz almost quadruples it. At idle, the timer tick consumes 8ms/s, but 5ms/s when the system is under full load (highest frequency). 8ms is less than 1% of the cpu usage of one core on a processor.

On the flip-side, one change I made with switching to 250hz is to re-instate a sampling down factor on ondemand. While the system is idle, it consumes about 3-5ms/s worth of processing to determine the next frequency. While the system is under full load, or near full load, ondemand consumes less than 1ms/s.

One thing I was wondering if you could try is adding rqshare=mc to your kernel parameters. Liquorix is currently configured with smt runqueue sharing, which improves throughput by looking for tasks in the order of cache locality. This might be influencing your underruns in a bad way.

Terence commented on 2018-11-18 15:22

@damentz I tried your suggestion but it didn't seem to improve things. I have between 3 and 4 times less xruns when using 1000Hz tick rate compared to the now default 250Hz. My test settings were a sample rate of 48000 Hz with 64 as the buffer size giving a latency of 1.3ms. I used the performance governor. I normally use 128 as the buffer size but I increased it in order to get more frequent xruns. An other observation is the schedutil is closer to the performance governor in terms of xruns at 1000Hz but there is a bigger gap between both at 250Hz.

I'm still wondering if it wouldn't make sense to keep 250hz as the default as my usage is quite an edge case I would say.

damentz commented on 2018-11-17 19:15

@Terence, try setting rr_interval back to 3 in /proc/sys/kernel. If that doesn't help, then it's the kernel tick frequency.

And thanks for reporting. Con has mentioned that the kernel tick frequency shouldn't matter and that MuQSS is "tickless". This may prove the opposite and that you still need a high frequency tick rate to support soft-realtime applications properly.

Let me know which of the two settings helps you the most - I'll update the configuration accordingly.

Terence commented on 2018-11-16 12:27

@damentz your changes introduced by while being saner defaults degrades realtime audio/midi performances (more frequent xruns). Would only changing back the tick to 1000hz locally enough?

sir_lucjan commented on 2018-11-13 19:47


Because 4.18.18-lqx patchset includes 4.18.18 from upstream.

Agafron commented on 2018-11-13 19:43

Downloading linux-4.18.tar.xz





Why is downloading linux-4.18.tar.xz instead of linux-4.18.18.tar.xz?

CybeX commented on 2018-11-13 10:00

If anyone has an issue in building the kernel relating to:

 Verifying source file signatures with gpg...
    linux-4.18.tar ... FAILED (unknown public key 79BE3E4300411886)
==> ERROR:</font> One or more PGP signatures could not be verified!
Use the following:
gpg --keyserver hkps:// --recv-keys 79BE3E4300411886

gaougalos commented on 2018-11-10 17:16

When installing this kernel i get ERROR: module not found: `usbhid'

mapcode.mind commented on 2018-10-11 20:40

i'm happy to report that the package compiled and installed successfully. @damentz : your comment is informative; I didn't know that having not used makepkg before. I was unsuccessfully trying to edit the PKGBUILD variables to make it create the correct file. Thanks a lot for your input.

@sir_lucjan : about manjaro not being arch, i know that. I was thinking of using manjaro as a stepping stone towards arch, coming from a debian system. But, i have no complaints with the system i have now. Nor can i figure out a compelling enough reason to switch. In fact, this is the first issue i have had with aur since i installed manjaro, and i am pretty sure that this was an issue with aur helper yay and not manjaro itself. Thanks a lot for your comments and suggestions; they were really helpful.