Package Details: gqrx-git 20200115-1

Git Clone URL: (read-only, click to copy)
Package Base: gqrx-git
Description: SDR receiver for Funcube Dongle, RTL-SDR, USRP and OsmoSDR devices.
Upstream URL:
Licenses: GPL
Conflicts: gqrx
Submitter: ivanovp
Maintainer: ivanovp
Last Packager: ivanovp
Votes: 37
Popularity: 0.000002
First Submitted: 2012-06-30 13:13
Last Updated: 2020-01-21 19:22

Latest Comments

« First ‹ Previous 1 2 3 4 5 6 Next › Last »

ivanovp commented on 2013-02-19 15:53

rtl-sdl-git was removed from dependencies.

asdil12 commented on 2013-02-18 09:34

@ivanovp: please remove rtl-sdr-git from dependencies, as the rtl-sdr dependency is already covered by gr-osmosdr-git. gqrx only links against gr-osmosdr-git, which is wrapping the different SDR devices.

asdil12 commented on 2013-02-18 09:04

@ivanovp: please change the dependency rtl-sdr-git to rtl-sdr as there is a binary pkg in [community]. - I'll also recommend this to the gr-osmosdr-git maintainer to have gr-osmosdr-git linked against this pkg.

asdil12 commented on 2013-02-18 09:01

@geek-59600: workaround is building gnuradio (non gnuradio-git) from aur, but modifying the PKGBUILD and adding 'gnuradio-git' to the provides section.

Anonymous comment on 2013-02-16 00:35

So we can't use gqrx until there is a packet for boost-libs 1.53 ?

ivanovp commented on 2013-02-12 17:17

Unfortunately gnuradio-git needs boost-libs>=1.53, but 1.53 is not available now.

Anonymous comment on 2013-02-11 22:22

I think there is a problem with boost 1.52.
Since i have installed boost 1.52 i can't run gqrx and i can't compile it too

nickoe commented on 2013-02-09 19:52

I get the following error, even thoug I have just build gnuradio-git and rtl-sdr-git.

Project ERROR: Package gnuradio-core not found

nickoe commented on 2013-02-09 19:51

I get the following error, Project ERROR: Package gnuradio-core not found.

Gringo commented on 2013-01-24 19:23

I had some problems with my DVB-T receiver before, but this seems now fixed. Users of adapters with the rtl2832u chipset can now probably use the dvb_v2 driver from the kernel (>= 3.7.3).

Use the following installation order to get Gqrx working for rtl8232u: libuhd -> gnuradio-git -> rtl-sdr-git -> gr-osmosdr-git -> gqrx-git .

My adapter is the Ezcap EZTV645 [1] identified by Linux 3.7.4 as [2] and receives radio just fine if the mode is set to Wide FM (stereo).

[1] Ezcap EZTV645 (
[3] dmesg | grep dvb: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected