Package Details: dvb-usb-rtl2832u-openpli 20130918-6

Git Clone URL: (read-only, click to copy)
Package Base: dvb-usb-rtl2832u-openpli
Description: Linux module for the RTL2832U DVB-T USB2.0 device
Upstream URL:
Licenses: GPL
Provides: dvb-usb-rtl2832u
Submitter: R00KIE
Maintainer: R00KIE
Last Packager: R00KIE
Votes: 18
Popularity: 0.000000
First Submitted: 2012-04-02 18:06
Last Updated: 2017-07-23 11:59

Latest Comments

« First ‹ Previous 1 2 3 4 5 6 7 8 9 Next › Last »

R00KIE commented on 2013-09-05 16:27

No it didn't, the checksum is the same.

Check with a browser or with wget that you can get the patch file.

kamiljk87 commented on 2013-09-05 15:23

Looks like patch file checksum changed...

R00KIE commented on 2013-09-03 14:00

Good that it works with the driver included in the kernel :)

Out of curiosity, what's the output of 'pacman -Q linux' and 'uname -r' when building the driver fails?

Exeleration-G commented on 2013-09-02 14:22

Tried that, didn't help. But it seems like Arch can run this DVB dongle without installing this package, too. Pretty cool, that wasn't possible in Ubuntu.

R00KIE commented on 2013-08-31 21:25

Reboot and try again.

Exeleration-G commented on 2013-08-31 21:11

Getting an error while building:

R00KIE commented on 2013-08-31 15:15

If you want to try the kernel's driver just uninstall this one.

The easiest way would be, uninstall this driver, reboot without the usb receiver plugged in, then watch the output of dmesg before and after you plug the receiver. Check if your device is recognized and if the tuner inside supported, give it a test with the program you usually use to watch tv.

For reference here is what I get when I plug my adapter when using the kernel's driver:
usb 6-1: new high-speed USB device number 7 using ehci-pci
usb 6-1: dvb_usb_v2: found a 'Dexatek DK DVB-T Dongle' in warm state
usbcore: registered new interface driver dvb_usb_rtl28xxu
usb 6-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Dexatek DK DVB-T Dongle)
usb 6-1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
i2c i2c-5: fc0012: Fitipower FC0012 successfully identified
Registered IR keymap rc-empty
input: Dexatek DK DVB-T Dongle as /devices/pci0000:00/0000:00:13.5/usb6/6-1/rc/rc0/input16
rc0: Dexatek DK DVB-T Dongle as /devices/pci0000:00/0000:00:13.5/usb6/6-1/rc/rc0
usb 6-1: dvb_usb_v2: schedule remote query interval to 400 msecs
usb 6-1: dvb_usb_v2: 'Dexatek DK DVB-T Dongle' successfully initialized and connected

vibee commented on 2013-08-31 14:48

@R00KIE: Thanks for the fast update and your comment. If I want to try the driver provided by the kernel, do I need to load it initially? WIthout installing this driver, it hasn't been working yet.

R00KIE commented on 2013-08-31 12:03

I have made the change you suggested.

It seems the sources were moved and one patch I was applying is no longer needed as it was included in these newer sources. The new sources match my local copy of the old sources after applying the patch.

Again I recommend that you check if the driver provided by the kernel works for your usb receiver. The driver from the kernel lacks the refinements included in this driver (1) but it should work more reliably from my experience. As a bonus if you use the kernel driver there is nothing to rebuild with each kernel update.

(1) Some changes were made to this driver so that signal strength and snr are normalized and shown in a scale of 0-100%.

vibee commented on 2013-08-31 01:21

Seems like the package is broken due to a kernel patch update?

I tried to edit the PKGBUILD and typed the correct URL to dvb-usb-rtl2832.patch and updated the md5sum as well. Unfortunately, I am being asked which file to patch (I have no clue).